Mesin Pengecutan Wap Kain

Mesin mengecut Fabrik Besar

National installation steam basin design, internal steam recycling, energy saving 40% than the same type of products; Ensure no dripping, ensure good pre-shrinking effect; Adopt imported brand control electrical appliances, the machine is more durable.

Reduce the fabric preshrinking rate, stabilize the fabric size, improve fabric quality.
Function:
1.Electric heater preheating, heating mesh belt, prevent water droplets.
2.Double steam area, fabric shrinkage effect will be better ,machine work efficiency higher.
3.Four drying area. Drying is mainly by steam heating, electric heating is auxiliary. Not only for save energy but also meet the temperature requirements of different fabric.
4.Adopt strong cooling device, quickly cooling fabric, stabilize fabric size.
5.Vibration function allow the fiber to be fluffy naturally.
6.Spreading fabric 、Measurement、folding fabric.

Knit and woven ,a variety of general fabric.Especially suitable for pure cotton, silk, wool, linen, synthetic fiber and mixed textiles.

Feature:
1.Fully sealed unique design steam cover: no leakage of steam, reduce the  steam consumption (save about 40% steam consumption than other type product), ensure no water dripping.
2.The steam cover is made of three layers of stainless steel,good heat preservation and thermal insulation effect.
3.Electronic eye monitoring releasing fabric , make sure fabric is in the tension-free state.
4.Step-less Frequency Conversion Timing.
5.Equipped with original imported electrical appliances, stable performance,machine is durable.
6.Use high temperature resistant Teflon mesh belt.
 
Model YL-8800
Voltan& Kekerapan AC 380V 50HZ
Penggunaan wap 200kg/j
Tekanan wap 0.4-0.7 MPA
Diameter fabrik gulung maksimum 40cm
Lebar kerja maksimum 2100mm
Kelajuan kerja Boleh laras, 0-20m/min
Suhu pengeringan Boleh laras,≤200 °C
Kuasa pemanasan pengeringan 28kw
Jumlah Kuasa 32.24kw
Dimensi sempadan 9000 * 2610 * 1650mm